![]() In order to re-enter normal operational model, simply remove and replace power to the device. ![]() Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. ![]() The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. 2014/35/EU with CE Mark (Europe) GS Certificate (Germany, Europe) UL/cUL Listed and UC CoC. Submit a valid PIN to reset the settings for your beacon to factory defaults. Standard: Apple AirPrint,30 HP ePrint31, Mopria-certified. Reset the device to the original factory settings. Ruggedized and weatherproof, the RadBeacon X4 gets maximum. The RadBeacon X4 provides seamless proximity services for both iOS and Android mobile devices. Press the Action Menu button and select Reset. RadBeacon X4 is an all-weather, long-life Bluetooth Smart proximity multi-beacon using iBeacon, AltBeacon, and Eddystone technology, including Physical Web and Eddystone EID. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. (If the RadBeacon is not configurable, then an "unable to connect" message will be displayed after approximately 15 seconds.) The settings displayed include: If the RadBeacon is configurable, its detailed settings will be displayed. ![]() Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by pressing the SCAN button. Once discovered, if the beacon is configurable, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby Radius Networks beacons. The RadBeacon app from Radius Networks requires an Android device running Android 4.3 or higher and equipped with Bluetooth 4.0 capabilities. The indicative maps showing where protective measures may be required in new buildings and extensions, conversions and refurbishments in existing buildings are available on the Building Research Establishment website : RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services and the AltBeacon proximity services for Android devices. More details of the protective measures required are available from the Building Research Establishment website. The requirement for radon protective measures for building sites in Great Britain is available through the British Geological Survey GeoReports service.ĭepending on the probability of buildings having high radon levels, the Regulations may require either: The Radon Risk Report available from this website provides information on whether existing properties are in areas where radon protective measures are required. When extensions are made to existing buildings in high radon areas, or new buildings are constructed in these areas, the Building Regulations require that protective measures are taken against radon entering the building. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |